Beam Remote Codes: Guide To Program Beam Universal Remote

Beam universal remotes have gained popularity for their compatibility and ease of use with various devices. Programming a Beam remote is a straightforward process, and understanding the remote code is essential for a seamless experience. Beam universal remotes are a great way to control all your devices from one place They can be programmed to work with a variety of TVs, cable boxes, streaming devices, and more. In this article, we’ll walk you through the process of programming your Beam universal remote using both the code list and the Beam app.

Beam Remote Codes

Beam Remote Codes are unique sequences of numbers that correspond to specific devices. These codes allow the remote to communicate with and control various electronic devices such as TVs, audio systems, and streaming devices. By inputting the correct code for a specific device, users can synchronize their Beam remotes for efficient and convenient control.

How To Program A Beam Universal Remote Control?

• Turn on your TV and the device you want to program the remote to.
• Press and hold the PROGRAM button on the Beam remote until the POWER button lights up red.
• Press the Activity button you want to set, and it will light up. The LED of the POWER button turns off.
• Enter the three- or four-digit code for your device using the number buttons on the Beam remote.
• You will hear a long beep if the code is correct. If the code is incorrect, you will hear a short beep.
• Try another code from the list or use the Beam app to find the correct code.
• If the code is correct, the LED of the Activity button will turn off.
• Test the remote to make sure it is working properly.

Programming Using the Beam app

• Open the Beam app on your smartphone or tablet.
• Select the device you want to program the remote to.
• Follow the on-screen instructions to program the remote.

If you’re having trouble programming the Beam remote, make sure you’re entering the code correctly. You may need to try different codes from the list to find one that works with your device. If you still have problems, you can contact Beam customer support for help.

Program A Beam Universal Remote Control To Another Remote

Beam universal remotes cannot directly copy codes from other remotes. However, you can achieve similar functionality by learning individual buttons from your original remote. Here’s how:

• Turn on both your original remote and the device you want to control.
• Press and hold the program button on your Beam remote until the power button turns red.
• Choose the beam remote button you want to program.
• Point both remotes directly at each other, about 0.5-1 inch apart.
• Press and hold the corresponding button on your original remote until you hear a long beep on the Beam remote. The power button will stop flashing.
• Follow steps 3-5 for each button you want to program on your Beam remote.
• Test to make sure the programmed buttons work. When satisfied, press the program button again to exit programming mode.

Last Words 

Beam remote codes simplify the process of programming your universal remote for different devices. By following the step-by-step instructions in this guide, users can effortlessly set up their Beam remote to control TVs, audio systems, streaming devices, and more. Be sure to refer to the latest code list available from Beam to guarantee compatibility with the latest devices on the market With the right codes, you can enjoy the convenience of a single remote to control all your entertainment devices.